buy polystyrene block machine
Posted: Wed Mar 06, 2019 7:22 am
(EPS) POLYSTYRENE BLOCK MOULDING MACHINE WITH ADJUST PLATE
Main Features:
1. With the use of PLC Controller (Programmable Logic Controller) and Touch Screen, the cycle process of opening and closing of the mould, material feeding, steaming, temperature preservation, cooling, mould ejection, and releasing the final product from the machine will be accomplished automatically;
2. This machine applies advanced EPS 'Heat Penetration Technology', fast forming, low consumption of steam, low moisture content, which make same high quality interior and exterior. Production cycle of each block is 4-8min. It is able to produce various density blocks between 6-40kg/m3;
3. Most of the main components are of world-famous brand, and reliable design makes the operation and production simpler and fault rate lower;
4. This machine applies hydraulic pressure transmission. Control system using differential control to control the velocity for the mould opening and closing. To ensure machine reliable performance, long working life and low maintenance cost;
5.The machine is coupled by using high quality welding method?which is subjected to aging treatment and heat treatment, to ensure the machine has high strength, without deformation and possibility of withstand the expansion force of the high-density products;
6. Applying a special Teflon coating to the surface of the mould cavity (Optional) makes the EPS Block to be easily ejected or released out of the mould;
7.This machine has an elevator template which can be moved up and down to produce different heights EPS blocks between 800mm-1220mm;
8. The thickened wall vacuum EPS block molding machine has Automatic Conveyer and Automatic Electronic Weighting Scale? (Optional)
No.ItemsUnit /TypeEPS-B-2000VEPS-B-3000VEPS-B-4000VEPS-B-6000VEPS-B-8000V
1Mold Sizemm2030x
(1240-840)x6303030x
(1240-840)x6304040x
(1240-840)x6306100x
(1240-840)x6308100x
(1240-840)x*630
2Block Sizemm2000x
(1200-800)x6003000x
(1200-800)x6004000x
(1200-800)x6006000x
(1200-800)x6008000x
(1200-800)x600
3ProductsKg/m3'6-30'6-30'6-30'6-30'6-30
density range
4Throughputmin/cycle3--53--85--85--108--15
5SteamPressureMpa0.80.80.80.80.8
6Inlet DNmm100100100100150
7Consumptionkg/cycle20--3030--4045--5560--7080--100
8CompressedPressureMpa0.60.60.60.60.6
9Air
Inlet DNmm4040404040
10Consumptionm3/cycle1.0-1.51.5-1.81.8-2.12.1-2.32.3-2.5
11Power Connectedkw9.59.5131315
12Voltagev380380380380380
13Overall Dimensionmm4000*
2100*30005000*
2100*30006100*
2100*30008200*
2100*310011000*
2200*3200
14Weightkg60006500100001200014000buy polystyrene block machine
website:http://www.epsmachinecn.com/polystyrene ... g-machine/
Main Features:
1. With the use of PLC Controller (Programmable Logic Controller) and Touch Screen, the cycle process of opening and closing of the mould, material feeding, steaming, temperature preservation, cooling, mould ejection, and releasing the final product from the machine will be accomplished automatically;
2. This machine applies advanced EPS 'Heat Penetration Technology', fast forming, low consumption of steam, low moisture content, which make same high quality interior and exterior. Production cycle of each block is 4-8min. It is able to produce various density blocks between 6-40kg/m3;
3. Most of the main components are of world-famous brand, and reliable design makes the operation and production simpler and fault rate lower;
4. This machine applies hydraulic pressure transmission. Control system using differential control to control the velocity for the mould opening and closing. To ensure machine reliable performance, long working life and low maintenance cost;
5.The machine is coupled by using high quality welding method?which is subjected to aging treatment and heat treatment, to ensure the machine has high strength, without deformation and possibility of withstand the expansion force of the high-density products;
6. Applying a special Teflon coating to the surface of the mould cavity (Optional) makes the EPS Block to be easily ejected or released out of the mould;
7.This machine has an elevator template which can be moved up and down to produce different heights EPS blocks between 800mm-1220mm;
8. The thickened wall vacuum EPS block molding machine has Automatic Conveyer and Automatic Electronic Weighting Scale? (Optional)
No.ItemsUnit /TypeEPS-B-2000VEPS-B-3000VEPS-B-4000VEPS-B-6000VEPS-B-8000V
1Mold Sizemm2030x
(1240-840)x6303030x
(1240-840)x6304040x
(1240-840)x6306100x
(1240-840)x6308100x
(1240-840)x*630
2Block Sizemm2000x
(1200-800)x6003000x
(1200-800)x6004000x
(1200-800)x6006000x
(1200-800)x6008000x
(1200-800)x600
3ProductsKg/m3'6-30'6-30'6-30'6-30'6-30
density range
4Throughputmin/cycle3--53--85--85--108--15
5SteamPressureMpa0.80.80.80.80.8
6Inlet DNmm100100100100150
7Consumptionkg/cycle20--3030--4045--5560--7080--100
8CompressedPressureMpa0.60.60.60.60.6
9Air
Inlet DNmm4040404040
10Consumptionm3/cycle1.0-1.51.5-1.81.8-2.12.1-2.32.3-2.5
11Power Connectedkw9.59.5131315
12Voltagev380380380380380
13Overall Dimensionmm4000*
2100*30005000*
2100*30006100*
2100*30008200*
2100*310011000*
2200*3200
14Weightkg60006500100001200014000buy polystyrene block machine
website:http://www.epsmachinecn.com/polystyrene ... g-machine/